Wardrobe Design Ideas: Layouts, Interiors and Fittings
Wardrobe design ideas: layouts by room size, interior fittings that add 30% capacity, materials, lighting and bespoke wardrobe manufacturing.
read more…
Cabinet organization goes wrong at the measuring stage, not the shopping stage. Set the shelf pitch from the tallest thing you store, keep daily items between 75 and 145 cm from the floor, and give the open door a clear walkway: the clutter problem mostly solves itself.
This page collects the numbers that keep a cabinet, dresser or sideboard organized a year later: interior dimensions, zoning, drawers, dividers and no-drill rental fixes. The pieces behind every example stand in EvergoCasa’s 20,000 m2 showroom in Foshan, where drawers open before you order, not after.
The cabinet organization decisions that matter most
Most cluttered cabinets share one failure: every shelf sits at the same height, so tall items jam and shallow items drown. Three decisions fix it.
- Zone by frequency and weight. Daily items at 75-145 cm, where nothing needs a stool; heavy pots in the bottom third; seasonal stock above 180 cm.
- Set the pitch from the tallest item. A 30 cm stockpot needs a 33 cm bay; a 25 cm plate stack needs 28 cm.
- Leave the door room to work. A 90-120 cm walkway in front of an open door turns a cabinet into a system.
Settle these on the elevation; the fittings list writes itself.
Interior sizes and clearances that decide what fits
The numbers we check on every drawing before production.
| Element | Number to hold | Note |
|---|---|---|
| Base cabinet interior depth | 55-60 cm | Takes a plate stack and a 30 cm pot |
| Wall cabinet depth | 33-35 cm | Past 35 cm you meet it forehead-first |
| Shelf pitch, general | 30-35 cm | Tallest item plus 3 cm of hand room |
| Top drawer | 12-15 cm | Utensils, watches, cables |
| Middle drawer | 20-25 cm | Shirts, knitwear, folded tops |
| Bottom drawer | 28-35 cm | Jeans, bedding, shoes |
| Shelf span before sag | 75 cm | Support anything over 12 kg at 75 cm or less |
| Tray divider pitch | 15-20 cm | Cutting boards, sheet pans, trays |
| Walkway, open door | 90-120 cm | 75 cm minimum with a 60 cm door swing |
Base depth and shelf pitch decide most outcomes; the rest is dividers.
Cabinet organization ideas across every room and product type
Kitchen and pantry cabinets
The tallest item sets the pitch; the stockpot and plate-stack examples above carry here too. Pantry staples at eye level, bulk above 180 cm. Door style changes what the interior holds; cabinet design ideas covers the outside.
Dresser organization inside the drawers
Dressers run 45-50 cm deep: a 12-15 cm top drawer for watches and cables, then 20-25 cm drawers for knitwear. Dividers at 10-15 cm pitch turn one 90 cm drawer into a sock, belt and underwear drawer. Dresser decor ideas handles the top surface.
Sideboards and media cabinets
Sideboards run 40-45 cm deep and 75-85 cm high. Leave 5-8 cm behind the carcass for cables and vent the back panel. Keep the top to three objects (sideboard styling ideas).
Entryways and overflow
Hallways need shallow pieces: a 40 cm cabinet keeps the walkway at 90 cm. Give keys, mail and parcels one drawer or tray inside, and the surface stays clear on its own. Overflow goes to a storage bench at the door.
Whatever the room, pitch still comes from the tallest thing the shelf will hold.
Choosing materials for a cabinet organization project
Organization systems fail through hardware and finish long before the carcass gives up. Full-extension runners on drawers wider than 60 cm, daily-grade hinges, shelf pins that hold under load: specify those before color. Ours is FSC-certified sourcing with EPA/CARB compliance, documented on the factory facts and craftsmanship page. Pulls are the parts hands touch most; the cabinet hardware guide covers sizing.
Care belongs in the same specification conversation: wipe interiors with a damp cloth and mild soap, keep standing water off exposed edges, and re-seat a shelf pin at the first sign of wobble.
Rental-friendly fixes that need no drilling
Tension rods split a tall cabinet vertically, adhesive bins line deep shelves, freestanding pull-out columns open a blind corner. None touch the carcass, so the deposit stays. Lock hardware into the drawing first; color is the one call you can reverse after delivery.
Get this look for your projectNo obligation. We reply with an indicative price and MOQ for your specification.
How we run a cabinet organization project, step by step
- Measure the interior, not the door. Carcass walls take about 12 mm per side, so a 90 cm unit gives 87.6 cm clear.
- List contents by tallest item and by weight. Height sets the pitch; weight sets the span.
- Set the pitch at tallest item plus 3 cm. The gap lets a hand in without lifting the shelf above.
- Draw the zones on the elevation. Daily 75-145 cm, heavy below 75 cm, seasonal above 180 cm.
- Specify fittings last. Full-extension runners above 60 cm of drawer width; dividers at the pitches set above.
On a factory order these five lines become the spec sheet; our custom and OEM process freezes them in writing.
Trade quantities only: who we can supply
EvergoCasa is a manufacturer, not a shop.
Who we work with
We supply project quantities. Our minimum order is 10 pieces per catalogue model (custom and OEM work starts from one 20GP container), and we work with hotels, developers, offices and trade buyers. We do not sell single pieces or retail orders.
- Catalogue models: 10 pieces per model; mixed-model orders are normal.
- Custom and OEM: from one 20GP container; hotel buyers can benchmark quantities with our hotel FF&E MOQ and lead time rules.
Buyers who cannot fly in yet should start with how to buy furniture from China remotely. If your quantities clear those floors, the interiors here move straight onto a quote drawing.
Buying one cabinet vs ordering a project run
Two ways to buy the same cabinet; every difference below is in writing.
| Decision | Retail shelf | Project sourcing |
|---|
| Quantity | one piece | 10 per model; mixed models normal |
|---|
| Interior | whatever the carton holds | pitch and drawer heights on the drawing |
|---|
| Lead time | stock only | 30-45 days from specification freeze |
|---|
| Payment | card at checkout | 30% T/T, balance before shipment |
|---|
| Inspection | your own eyes | 100% visual check against a signed reference sample |
|---|
| Warranty | store policy | 3-5 years per the order confirmation |
|---|
Read left to right, the choice reduces to one question: who controls the interior.
See it in person at our Foshan showroom
A catalogue PDF makes interiors guesswork. Our factory-integrated showroom in Longjiang, Foshan puts 20,000 m2 of live displays across four zones: the A Living Gallery, the B Sleep & Comfort floor, the C Material Lab with 100+ Italian leather swatches and the D Contract Negotiation Lounge. More than 500 craftsmen build what the floor displays, with 2,000+ live SKUs to pull open and test.
We arrange a complimentary private transfer from Guangzhou Baiyun Airport (CAN) and hotel bookings at corporate rates. Hours are Monday to Saturday, 9:00-18:00 GMT+8; Sunday by appointment. Book on WhatsApp +86 134 1329 4494, or see the Foshan showroom visit agenda first.
Depth, pitch, drawer heights, walkway: measure first, zone second, buy fittings last, and test the real cabinets before you sign.
What is the minimum order?
The minimum is 10 pieces per catalogue model, per color SKU. Mixed-model orders are normal. Custom and OEM starts from one 20GP container.
Do you send samples before an order?
Yes, we ship samples: PPS, cover-only and finish panels, with days and fee written on each sample order.
Can I book a showroom appointment?
Yes, book by WhatsApp at +86 134 1329 4494 with your travel dates. Open Monday to Saturday, 9:00-18:00 GMT+8; Sunday by appointment, with a CAN airport transfer.
How long does production take?
Production takes 30-45 days of bulk manufacturing from the specification freeze, not from the inquiry date. Changes after the freeze restart the clock.
Which markets do you serve?
We serve buyers in 50+ countries. Incoterms per order, FOB or CIF; no DDP terms. Customs AEO held since 2019.
What warranty and payment terms apply?
Warranty runs 3-5 years per the order confirmation, and payment is 30% T/T on confirmation with the balance before shipment.
EvergoCasa is the Italian-minimalist brand of the Evergo Furniture Group, manufactured by Guangdong Aimigao Furniture Co., Ltd. in Longjiang, Shunde, Foshan since 2006. Catalogue models start at 10 pieces per model; OEM work starts from one 20GP container. Bulk production is 30-45 days from specification freeze. Payment is 30% T/T on confirmation, balance before shipment. Warranty is 3-5 years per the order confirmation documents. WhatsApp +86 134 1329 4494.
